Keep your weight plates tidy and easy to grab with this inexpensive plate storage solution.
Fits 2.3″ x 2.3″ uprights with 5/8″ holes only.
-
Keep your weight plates tidy and easy to grab with this inexpensive plate storage solution.
Fits 2.3″ x 2.3″ uprights with 5/8″ holes only.
$40.49
In Stock
The Plate Pegs are an easy, cheap win for your home gym — especially if you’re limited on floor space.
Weight | 1.4kg/3lbs |
Total Length | 287mm/11.3″ |
Sleeve Diameter | 48mm/1.9" |
Loadable Length | 229mm/9″ |
Sleeve Coating | Black Powder Coat |
Max Capacity | 200kg/440lbs |
Shipping Box Dimensions | 15" x 5" x 4" |
Warranty | Limited Lifetime Warranty |
IMPORTANT: Our Plate Pegs ONLY fit upright tubing dimensions of 2.3” x 2.3” (60mm x 60mm) with 5/8” holes — our standard Bells of Steel upright size.
Each Peg has a 48mm/1.9″mm sleeve diameter, measures 287mm/11.3″ long with a 76mm/3″ height.
Each Peg weighs 1.4kg/3lbs, for a combined weight of 2.8kg/6lbs.
It has a black powder coating.
Each Peg has 229mm/9” of loadable sleeve length for weight plates.
No, it’s very unlikely that they will fit. The Plate Pegs are designed to fit perfectly to fit our racks with 2.3” x 2.3″ / 60mm x 60 mm and 5/8” holes.
No, they are same-side facing. This means that no Plate Peg has a distinct right or left side, and they will not look symmetrical when mounted.
Only Olympic weight plates (with a 2” diameter center hole) will fit on the Plate Pegs.
In the box, you’ll find the following pieces: two (2) Plate Pegs.
No tools are needed, as there is no assembly required.
Covered under our Limited Lifetime Warranty guarantees that the Plate Pegs will not break under normal use, and protects against defects in material, function and workmanship.