1. Home
  2. /
  3. All Products
  4. /
  5. Packages
  6. /
  7. Starter Sets
  8. /
  9. Hydra Trident Station

Hydra Trident Station

Forge your fitness fortress with the Hydra Trident Station! This unit is a superhero team-up of a 4-Post Hydra Rack, storage system, and pair of Weight Stack Cable Towers.

With barbell lifts, storage and machine exercises all-in-one, your friends might just cancel their gym memberships, too.

FEATURES • True 3″ x 3″ uprights • 5/8″ holes • 11-gauge steel  • 1,000lb capacity • Black powder coat • Hardware included • Ships unassembled

From: $4,089.84

     FREE SHIPPING

     TRUSTED SINCE 2010

     EXCELLENT WARRANTY

This trid-ent true home gym is one of the best there is.

You might not be the Lord of the Sea but with the Hydra Trident Station, you’ll still feel like royalty 🔱

Benefits of the Hydra Trident Station

  • UNREAL VERSATILITY
    As far as home gym set-ups go, the Hydra Trident Station is a serious flex. It takes the granddaddy of all rack configurations, the 4-Post Hydra Rack, and beefs it up with a Batwing Storage look-alike, and then supercharges it with two Weight Stack Cable Towers. This trio allows you to perform your barbell lifts and cable machine exercises all in one area; perfect for those who can spare a good chunk of floor space but know that’s all they’re getting, unless they want to sleep on the couch for a few weeks (we’d humbly suggest a sit up mat for your pillow). With this much versatility in such an efficient footprint, your friends might just cancel their gym memberships, too… slumber party, anyone? 🎉
  • MODULAR STORAGE
    To keep those Cable Towers locked down, they’re mounted to a version of our Hydra Batwing Storage unit. This baby offers seriously storage capabilities along each piece of tubing. You can store your weight plates using bolt-on plate pegs for easy access. Or keep your barbells organized on hanging barbell holders. But the real beauty of this system is that when you (inevitably) change your mind, it’s no big deal. Simply rejig your gear into a new configuration or… *ahem* expand your system even further with more storage attachments 😏
  • COMPATIBLE WITH OTHER BRANDS
    If you’re a die-hard fan of the metric system, then listen up: the uprights of this Hydra rack measure true 3″ x 3″ which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands’ imported racks. By matching the same tubing specs as many of our American competitors who make their racks domestically *tips hat in respect*, you can mix and match attachments freely without needing to stick to one brand — hello, open ecosystem! Just be sure to research thoroughly BEFORE you begin the mingling shenanigans, deal?

Specs - Hydra Trident Station

Brand Bells of Steel
Weight +1,000lbs
Total Length (Depth) 43"
Total Width 143.5"
Total Height 84" or 90"
Rack Upright Specs True 3" x 3"
Tower Upright Specs 2.3" x 2.3"
Hole Size 5/8"
Rack Hole Spacing 1" & 2"
Rack Steel Thickness 11-Gauge/2.9mm
Coating Powder Coat
Color Black
Weight Capacity 1,000lbs
Warranty Limited Lifetime

IMPORTANT: Please note the tubing differences on the Hydra Trident Station: the Hydra Power Rack uses true 3″ x 3″ tubing with 5/8″ holes, so only attachments made precisely for 76.2mm x 76.2mm uprights will fit. However, the Cable Towers have our 2.3″ x 2.3″ with 5/8″ hole tubing, so only rack attachments from our Original Series will fit if you want to mount attachments directly to their guide rod uprights.

Frequently Asked Questions

  • What are the dimensions of the Hydra Trident Station?

    The dimensions of the Hydra Trident Station are:

    • 43″/1092mm depth
    • 143.5″/3645mm width
    • 84″/2 137mm or 90″/2286mm height
  • What is the minimum footprint required for the Hydra Trident Station?

    The minimum footprint required for the Hydra Trident Station is:

    • 48″ depth
    • 150″ width
    • 90″ or 96″ height

    Please note that this suggested footprint only offers an additional ~6″ to the depth, width & height of the assembled build. The height is dependent on the upright height you choose (84″ or 90″). If you want even more space around or above your build, ensure that your space can accommodate more than the dimensions listed above.

  • What are the components used to build the Hydra Trident Station?

    The components used to build the Hydra Trident Station are:
    • 3 x 84/90-UPRT-HDR (3 pairs of 84″ or 90″ uprights)
    • 2 x STK-PULT-MA (1 pair of weight stack cable towers without rear upright)
    • 1 x 43-CRS-HDR (1 x 43″ crossmember for across the front of the rack)
    • 1 x CRS-LOGO-HDR (1 x 43″ Hydra logo plate crossmember for across the back of the rack)
    • 1 x GLB-PUB-HDR (1 x Globe pull-up bar)
    • 2 x 30-CRS-HDR (2 pairs of 24″ crossmembers for inside the rack)
    • 3 x 30-CRS-HDR (3 pairs of 30″ crossmembers for rack to join to cable towers)
    • 1 x SSPA-RA-HDR (1 pair of spotter arms)
    • 1 x SW-CUP-RA-HDR (1 pair of sandwich j-cups)
    • 1 x YDIP-RA-HDR (1 x Hydra y dip)
  • Can 72" uprights be used instead of 84" or 90" for the Hydra Trident Station?

    No, 72″ uprights cannot be used because they won’t be tall enough to connect to the upper mounting brackets of the Cable Towers.

  • How can I get a slightly different design of the Hydra Trident Station?

    To get a slightly different design of the Hydra Trident Station, you can either:

    • Build it yourself using different components from what we’ve listed in this FAQ section, or
    • Contact us via email and one of our Customer Service Reps can put together a quote for you with the required items
  • What tools are needed to assemble the Hydra Trident Station?

    The tools needed to assemble the Hydra Trident Station are:

    • 17mm wrench & socket
    • 19mm wrench & socket
    • 24mm wrench & socket
    • Ratchet that fits the above sockets
    • Hammer

    *Correctly sized box-end, adjustable & socket wrenches are suitable alternatives.

  • What is the warranty on the Hydra Trident Station?

    The Hydra Trident Station has multiple components, which are covered under different warranties. The entire power rack is covered under our Limited Lifetime Warranty, which guarantees that it will not break under normal use and protects against defects in material, function and workmanship. The cables & pulleys of the Cable Towers are covered under a 1-year warranty, with the remaining components being protected under our Limited Lifetime Warranty.