Wind back the clock to lifting glory with these deep dish plates!
Covered in a gorgeous, semi-gloss black e-coat for ultra rust resistance with a precise 50.5mm center hole.
FEATURES • Machined steel • Weight tolerance +/-1% • Black e-coat • Semi-gloss finish • 50.5mm center hole • Weights in LB • Sold in pairs & sets
$34.99 – $1,779.99
-
Nothing beats old-school iron.
And with these deep dish plates, you can bring back those same vintage vibes — without having to dig out your leg warmers or water bed.
| Brand | Bells of Steel |
| Weight | 2.5/5/10/25/35/45/100lbs |
| Thickness | Varies |
| Plate Diameter | Varies |
| Hole Diameter | 1.98"/50.5mm |
| Colour | Black |
| Finish | Semi-Gloss |
| Coating | E-Coat |
| Material | Machined Iron |
| Tolerance | +/-1% |
| Warranty | Limited Lifetime |
IMPORTANT: These plates have a precision-cut 50.5mm center hole, so the sleeves of non-Olympic barbells might not fit if they’re out of spec.
Originally made for the automotive industry, e-coating has become increasingly popular due to its excellent durability and rust resistance. It’s applied in a thin layer, so the smooth e-coat binds closely to the iron to allow the natural grit underneath to be felt.
Thought these deep dish plates were just pretty to look at? Don’t be silly! Since the e-coat binds directly to the iron in a smooth layer, there are fewer nooks for chalk, sweat and bacteria to hide. One quick wipe and your plates are squeaky clean!
Inferior deep dish plates have large center hole diameters, allowing them to rattle around on your barbell like a beach ball at a music festival. On the other hand, ours are precision-drilled with a hole diameter of 50.5mm, giving your plates that snuggly-wuggly fit.
So, you’re not a huge fan of the gray hammertone colour on our original machined plates? No biggie. The semi-gloss, all-black colour on these deep dish plates will upgrade your space by becoming the sleek centrepiece of your home gym.
An electrocoat (e-coat) is a coating where the paint is applied using an electric charge, instead of being sprayed on.
E-coating is more durable and rust-resistant than a powder coat. Since it’s applied electronically, the coating is thinner, smoother, and easier to clean. Overall, e-coating is better than powder coating.
The deep dish plates are made from premium ductile cast iron for higher tensile & yield strength and better rust resistance.
These deep dish plates have a black, semi-gloss e-coating on them.
Yes — unlike some of our competitors, all of our deep dish plates are made from ductile iron. This includes the 2.5lb, 5lb & 10lb change plates.
Yes, the thin layer of glossy e-coat makes these deep dish plates more slippery than traditional iron plates with sprayed-on paint.
The deep dish plates are accurate to within +/-1% of their listed weight — guaranteed.
Covered under our Limited Lifetime Warranty, the deep dish plates are protected against defects in material, function and workmanship.
FREE SHIPPING
TRUSTED SINCE 2010
EXCELLENT WARRANTY
EXCELLENT WARRANTY