Stay safe by attaching these heavy-duty Spotter Arms, or use as a secondary squat/bench station.
Fits 2.3″ x 2.3″ uprights with 5/8″ holes only.
FREE SHIPPING
Spotter Arms Attachment – Pair
-
$119.99
In Stock
TRUSTED SINCE 2010
EXCELLENT WARRANTY
EXCELLENT WARRANTY
Train to failure while staying safe with
the heavy-duty Spotter Arms.
Robust set of Spotter Arms with UHMW protection that can be used on the inside or outside of your rack for dual use. For more info, check out Power Rack Safety Straps vs Bars vs Arms.
Specs Per Spotter Arm
| Weight | 5.9kg/13lbs |
| Total Length | 695.3mm/27.3″ |
| Usable Length | 635mm/25″ |
| Coating | Black Powder Coat |
| Lining | UHMW Plastic |
| Max Capacity | 181kg/400lb |
| Shipping Box Dimensions | 27" x 11" x 5" |
| Warranty | Limited Lifetime Warranty |
IMPORTANT: The Spotter Arms ONLY fit upright tubing dimensions of 2.3” x 2.3” (60mm x 60mm) with 5/8” holes — our standard Bells of Steel upright size.
Frequently Asked Questions
Each Arm has a 695.3mm/27.3″ length, has a 60mm/2.3″ width, and a 298.4mm/11.8″ height.
Each Arm weighs 5.9kg/13lbs, for a combined weight of 11.8kg/26lbs.
The lining material is UHMW plastic, with a black powder coat on the outside of the Spotter Arms.
Each Arm has 635mm/25” of usable arm length for catching your barbell.
No, it’s very unlikely that they will fit. The Spotter Arms are designed to fit perfectly to fit our racks with 2.3” x 2.3″ / 60mm x 60 mm and 5/8” holes.
Yes, each Spotter Arm has a distinct right or left side and they will look symmetrical when mounted.
Technically, yes — but it is NOT recommended. Unless the Squat Stands are heavily weighed down with sandbags or bolted to the floor, there is a high chance of tipping if the Spotter Arms are attached.
In the box, you’ll find the following pieces: two (2) Spotter Arms and two (2) hitch pins + cotter pins.
No tools are needed, as there is no assembly required.
Covered under our Limited Lifetime Warranty guarantees that the Spotter Arms will not break under normal use, and protects against defects in material, function and workmanship.