bells of steel power Rack Lat Pulldown attachment
  1. Home
  2. /
  3. All Products
  4. /
  5. Racks
  6. /
  7. Rack Attachments
  8. /
  9. Rack Lat Pulldown / Row Attachment – Light Commercial/Residential Power Rack

Rack Lat Pulldown / Row Attachment – Light Commercial/Residential Power Rack

Multi-functional Power Rack Lat Pulldown and Row Attachment to give your back muscles some love.

Fits the 84.5″ Light Commercial Rack and 84.5″ Residential Rack only.

$259.99

In Stock

-

     FREE SHIPPING

     TRUSTED SINCE 2010

     EXCELLENT WARRANTY

Build your back muscles and add hundreds of exercises
to your arsenal with the Power Rack Lat Pulldown Attachment.

A multi-purpose pulley system that attaches to the back of your rack allowing you to do seated rows, lat pulldowns, biceps curls, and hundreds of other cable-based exercises.

Specs

Weight22.7kg/50lbs
Length (depth)304.8mm/12″
Width304.8mm/12″
Height2203.4mm/86.75″
CoatingBlack Powder Coat
Max Capacity129.3kg/285lbs
Shipping Box Dimensions85" x 11" x 5"
WarrantyLimited Lifetime Warranty

IMPORTANT: This Power Rack Lat Pulldown / Low Row Attachment ONLY fits on the 84.5″ Light Commercial Rack and 84.5″ Residential Rack — it does NOT fit on our shorter 72″ models.

Assembly
instructions

Frequently Asked Questions

The power rack with lat pulldown dimensions are:

• 304.8mm/12″ length (depth)
• 304.8mm/12″ width at its widest
• 2203.4mm/86.75″ height

The power rack lat pulldown weighs 22.7kg/50lbs.

The power rack lat pulldown has a black powder coating.

Each Lever Arm has 229mm/9” of loadable sleeve length for weight plates.

No, it’s very unlikely that it will fit. The Lat Pulldown Attachment is designed to fit perfectly on the Bells of Steel 84.5″ Light Commercial Rack and 84.5″ Residential Rack only.

The power rack lat pulldown has a 129.3kg/285lb weight capacity.

Due to the slide-on adapters, the Power Rack Lat Pulldown Attachment can fit 1″ & 2″ weight plates.

In the box, you’ll find the following pieces: two (2) guide rods, upper and lower mounting brackets, two (2) cables, four (4) pulleys, slide with 2″ adapters, lat pulldown bar, short straight bar, 14″ chain, leg pad with padding, and hardware (bolts, washers, nuts).

To assemble the power rack lat pulldown, you’ll need:
• 17mm box end wrench
• 17mm socket & ratchet

Covered under our Limited Lifetime Warranty guarantees that the Lat Pulldown Attachment will not break under normal use, and protects against defects in material, function and workmanship.