The adjustable Lever Arms create a space-efficient solution to developing upper body explosive strength.
Fits 2.3″ x 2.3″ uprights with 5/8″ holes only. Regular 2″ collars will NOT fit.
The adjustable Lever Arms create a space-efficient solution to developing upper body explosive strength.
Fits 2.3″ x 2.3″ uprights with 5/8″ holes only. Regular 2″ collars will NOT fit.
In Stock
-
In Stock
Utilize the Lever Arms together or unilaterally for a variety of exercises: rows, presses, deadlifts — even use them for squats.
Weight | 11.3kg/25lbs |
Total Length | 287mm/11.3″ |
Sleeve Diameter | 48mm/1.9" |
Loadable Length | 229mm/9″ |
Sleeve Coating | Black Powder Coat |
Max Capacity | 200kg/440lbs |
Shipping Box Dimensions | 40" x 10" x 4" |
Warranty | Limited Lifetime Warranty |
IMPORTANT: Our Lever Arms ONLY fit upright tubing dimensions of 2.3” x 2.3” (60mm x 60mm) with 5/8” holes — our standard Bells of Steel upright size.
Please note the sleeves on the Lever Arms are made of steel tubing instead of traditional machined barbell sleeves. This means the sleeves are a few millimeters smaller than a typical barbell and regular 2″ collars will NOT fit correctly. However, our Axle Collar Zip Clips are designed specifically to fit the steel tubing sleeves to keep your weights secured tightly.
Each Lever Arm has a:
• 1,025.5mm/40.3″ length
• 574.6mm/22.6″ width
• 1,025.5mm/40.3″ depth off rack
• 49mm/1.9″ sleeve diameter
Each arm weighs 11.3kg/25lbs, for a combined weight of 22.6kg/50lbs.
It has a black powder coating.
Each Lever Arm has 229mm/9” of loadable sleeve length for weight plates.
No, it’s very unlikely that they will fit. The Lever Arms are designed to fit perfectly to fit our racks with 2.3” x 2.3″ / 60mm x 60 mm and 5/8” holes.
It has a 200kg/440lb weight capacity.
Only Olympic weight plates (with a 2” diameter center hole) will fit on the Lever Arms.
In the box, you’ll find the following pieces: two (2) tubing strips, mounting brackets with hardware (bolts, washers, nuts), handles, and hitch pins + cotter pins.
To assemble it, you’ll need:
• 19mm box end wrench
• 19mm socket & ratchet
Covered under our Limited Lifetime Warranty guarantees that the Lever Arms will not break under normal use, and protects against defects in material, function and workmanship.