An easily adjustable, heavy-duty Y Dip Bar Rack Attachment.
Fits 2.3″ x 2.3″ uprights with 5/8″ holes only. Will fit standard Bells of Steel Power Racks.
FREE SHIPPING
Y Dip Bar Rack Attachment
-
$99.99
In Stock
TRUSTED SINCE 2010
EXCELLENT WARRANTY
EXCELLENT WARRANTY
A heavy-duty Y Dip Bar Attachment for your power rack.
This attachment allows you to do dips and a variety of knee and leg raise exercises to target your abs.
IMPORTANT: Our Y-Dip Attachment ONLY fits upright tubing dimensions of 2.3” x 2.3” (60mm x 60mm) with 5/8” holes — our standard Bells of Steel upright size.
Specs
| Weight | 8.6kg/19lbs |
| Handle Diameter | 47.6mm/1.9” |
| Usable Handle Length | 413mm/16.25” |
| Coating | Black Powder Coat |
| Max Capacity | 200kg/440lbs |
| Shipping Box Dimensions | 30" x 13" x 4" |
| Warranty | Limited Lifetime Warranty |
Assembly
instructions
Frequently Asked Questions
The y dip bar rack attachment has 47.6mm/1.9” handle diameter, 406.4mm/16” total width, and sits 737mm/29″ off the rack.
The y dip bar rack attachment weighs 8.6kg/19lbs.
The y dip bar rack attachment has a black powder coating.
The y dip bar rack attachment has 413mm/16.25” of usable handle length.
No, it’s very unlikely that it will fit. The Y Dip Attachment is designed to fit perfectly to fit our racks with 2.3” x 2.3″ / 60mm x 60 mm and 5/8” holes.
The y dip bar rack attachment has a 200kg/440lb weight capacity.
In the box, you’ll find the following pieces: two (2) dip bars, mounting hardware (washers, nuts & bolts), mounting bracket, hitch pin + cotter pin.
To assemble it, you’ll need:
• 19mm box end wrench
• 19mm socket & ratchet
Covered under our Limited Lifetime Warranty guarantees that the Y Dip Attachment will not break under normal use, and protects against defects in material, function and workmanship.