bells of steel power Rack Lat Pulldown attachment
  1. Home
  2. /
  3. All Products
  4. /
  5. Racks
  6. /
  7. Rack Attachments
  8. /
  9. Rack Lat Pulldown / Row Attachment – Light Commercial/Residential Power Rack

Rack Lat Pulldown / Row Attachment – Light Commercial/Residential Power Rack

Multi-functional Power Rack Lat Pulldown and Row Attachment to give your back muscles some love.

Fits the 84.5″ Light Commercial Rack and 84.5″ Residential Rack only.


In Stock





Build your back muscles and add hundreds of exercises
to your arsenal with the Power Rack Lat Pulldown Attachment.

A multi-purpose pulley system that attaches to the back of your rack allowing you to do seated rows, lat pulldowns, biceps curls, and hundreds of other cable-based exercises.


Length (depth)304.8mm/12″
CoatingBlack Powder Coat
Max Capacity129.3kg/285lbs
Shipping Box Dimensions85" x 11" x 5"
WarrantyLimited Lifetime Warranty

IMPORTANT: This Power Rack Lat Pulldown / Low Row Attachment ONLY fits on the 84.5″ Light Commercial Rack and 84.5″ Residential Rack — it does NOT fit on our shorter 72″ models.


Frequently Asked Questions

The power rack with lat pulldown dimensions are:

• 304.8mm/12″ length (depth)
• 304.8mm/12″ width at its widest
• 2203.4mm/86.75″ height

The power rack lat pulldown weighs 22.7kg/50lbs.

The power rack lat pulldown has a black powder coating.

Each Lever Arm has 229mm/9” of loadable sleeve length for weight plates.

No, it’s very unlikely that it will fit. The Lat Pulldown Attachment is designed to fit perfectly on the Bells of Steel 84.5″ Light Commercial Rack and 84.5″ Residential Rack only.

The power rack lat pulldown has a 129.3kg/285lb weight capacity.

Due to the slide-on adapters, the Power Rack Lat Pulldown Attachment can fit 1″ & 2″ weight plates.

In the box, you’ll find the following pieces: two (2) guide rods, upper and lower mounting brackets, two (2) cables, four (4) pulleys, slide with 2″ adapters, lat pulldown bar, short straight bar, 14″ chain, leg pad with padding, and hardware (bolts, washers, nuts).

To assemble the power rack lat pulldown, you’ll need:
• 17mm box end wrench
• 17mm socket & ratchet

Covered under our Limited Lifetime Warranty guarantees that the Lat Pulldown Attachment will not break under normal use, and protects against defects in material, function and workmanship.

Customer Reviews
4.6 Based on 39 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • rack
  • attachment
  • quality
  • issue
  • work
  • exercises
  • pulley
  • cable
  • functionality
  • bars
Canada Canada

Great value

Overall a great addition to add functionality to a rack. Nice and smooth movement. The only reason I rate this 4 stars rather than 5 is that the welded brackets for the pulleys are substantially wider than the core of the pulleys. They could use a spacer or bushing to get a tighter fit, otherwise it's kind of pointless having a bearing integrated into the pulley. The two pulleys bolted through the top crossmember are much more secure.

  • My Fitness Goal Is: Get bigger, stronger, and better conditioned.

Bells of Steel

Hey Quinn, Thank you for the review and the feedback, We are always looking to improve out designs and appreciate all feedback. Yours in strength, William & the BoS crew


Perfect addition

Awesome addition to my home gym. Just assembled yesterday, so I don't know about long term use, but everything else from BoS has been great. Biggest issue I have seen in reviews was people talking about the top pulldown being behind the cross member, so it affects the angle you can pull cable (for example, facepulls, or cable flies). These can be accomplished with an extra pulley and the leg bar from the lat kit. You can basically hit any height you want with this setup.

  • My Fitness Goal Is: General fitness
Bells of Steel Rack Lat Pulldown / Row Attachment - Light Commercial/Residential Power Rack Review

Bells of Steel

Hey Greg, Thank you for the review and the feedback on the position of the top pulley, we are always looking to improve our products. Enjoy the gainz! Yours in strength, William & the BoS crew

Jennifer M.

Didn’t receive all peices

Not sure. Unable to put it together because I don’t have the piece at the bottom to be able to anchor it to my utility rack that I have from bells of steel. I emailed last week and got no response.

  • My Fitness Goal Is: Build muscle

Bells of Steel

Hey Jennifer, Thank you for the review, We have reached out via email to fix this and get you the part you need to get to your gainz. Yours in strength, William



Love it. Definitely fits my home gym.

  • My Fitness Goal Is: To be a beast

Bells of Steel

Hey there, Thanks for the 5 star review. The Lat pull/ low row is a great attachment to any of our racks. We are glad that it fits so well in your home gym. You are looking to be a beast and this animal of an attachment will definitely help get you there. Thanks again, The B.o.S. Crew


Great with some minor complaints

Great attachment, probably the best out of all the attachments you can get. If you can only afford one attachment I would probably pick this one. You can pretty do all machine exercises on it and it is super versatile. A few minor complaints, the first one being that after a month the chain supplied that attaches to the handles started opening up (attached a photo). Luckily I had a spare thicker chain from buying suspension straps and replaced the thinner chain. Secondly the attachment point at the top scratches the rack a bit if you do exercises that are higher up such as face pulls since the crossmember of the rack gets in the way which seems like a odd oversight. Its nice that it comes with all the attachments you need though I did end up getting a tricep rope.

  • My Fitness Goal Is: get stronger, lift more
Bells of Steel Rack Lat Pulldown / Row Attachment - Light Commercial/Residential Power Rack ReviewBells of Steel Rack Lat Pulldown / Row Attachment - Light Commercial/Residential Power Rack Review

Bells of Steel

Hi Ryan, Thanks for the review on our Rack lat pull down! Happy to hear you are overall happy with the product. For any defects please reach out to our customer service department. Contact us for any concerns and we would be happy to help you out! Glad to hear you were able to fix the issue on your own. We appreciate you allowing us to supply you with our products and enjoy your gainz! Irene and the B.o.S. Crew