Attaches to the front of your rack for all types of cable work from both top and bottom pulleys.
Fits the 84.5″ Light Commercial & Residential Rack, Brute Rack, and Utility Rack.
-
Attaches to the front of your rack for all types of cable work from both top and bottom pulleys.
Fits the 84.5″ Light Commercial & Residential Rack, Brute Rack, and Utility Rack.
$559.99
In Stock
Attaches to the front of your rack to allow for cable cross workouts and all forms of pulling work from both top and bottom pulleys only.
Weight | 49.9kg/110lbs |
Length (depth) | 660.4mm/26″ |
Width | 1016mm/40″ |
Height | 2146.3mm/84.5″ |
Coating | Black Powder Coat |
Max Capacity | 72.6kg/160lbs |
Shipping Box Dimensions | 88" x 13" x 7" |
Warranty | Limited Lifetime Warranty |
IMPORTANT: Since there is no adjustable feature to this rack attachment, the Cable Crossover can only be operated from the top or bottom positions.
• 660.4mm/26″ length (depth)
• 1016mmmm/40″ width at its widest
• 2146.3mm/84.5″ height
It weighs 49.9kg/110lbs.
It has a black powder coating.
Each Lever Arm has 229mm/9” of loadable sleeve length for weight plates.
No, it’s very unlikely that it will fit. The Cable Crossover Attachment is designed to perfectly fit our racks with 2.3” x 2.3″ / 60mm x 60 mm uprights and 5/8” holes.
It has a 72.6kg/160lb weight capacity per side.
Due to the slide-on adapters, the Cable Crossover Attachment can fit 1″ & 2″ weight plates.
In the box, you’ll find the following pieces: two (2) guide rails, two (2) lower arm brackets, two (2) handles, two (2) slides with 2″ adapters, four (4) pulleys, two (2) upper cross-members, one (1) single upper beam, and hardware (bolts, washers, nuts).
To assemble it, you’ll need:
• 24mm box end wrench
• 24mm socket & ratchet
• 17mm box end wrench
• 17mm socket & ratchet
Covered under our Limited Lifetime Warranty guarantees that the Cable Crossover Attachment will not break under normal use, and protects against defects in material, function and workmanship.