1. Home
  2. /
  3. All Products
  4. /
  5. Racks
  6. /
  7. Hydra
  8. /
  9. Hydra Attachments
  10. /
  11. Hydra Non-Storage Attachments
  12. /
  13. Hydra Lever Arms – Pair

Hydra Lever Arms – Pair

The Hydra Lever Arms simulate dozens of machine exercises in only a fraction of the space & without a jaw-dropping price tag.

Compatible with our Hydra power racks & select racks that have true 3″ x 3″ uprights with 5/8″ holes.

FEATURES • Manual height adjustments • 12.75″ sleeve length • 32lb weight/arm • Multi-grip handles • Black powder coat • Ships unassembled


In Stock





Simulate dozens of machine exercises in only a fraction
of the space & without the jaw-dropping price tag.

Tired of bodyweight exercises? Want a break from your barbell? Ready to sell all your home’s furniture to fit an entire fleet of machines?

The Hydra Lever Arms (affordably) add dozens of machine-like exercises to your routine — without you having to sleep on your treadmill.

Benefits of the Hydra Lever Arms

    Unlike its older sibling (the Sliding Lever Arms), the Hydra Lever Arms must be removed from your uprights whenever their height needs changing. That said, adjustments are straightforward with the simple mounting bracket & pin. Just slide the bracket’s welded pin through your upright at the height you want, and secure the rear detent pin to lock the entire arm into place. Re-position the 32mm handle heights if needed, and you’re ready to lift! And don’t forget, being the younger sibling has its perks — lighter weight, longer sleeves, and costing less than HALF the price *cha-ching!* 💰
    Machines are great: they add versatility to your workouts, target your muscles differently, and can bring some fun back into your workouts. That said, it’s rare for a single machine to accomplish more than a couple of exercises unless you’re a Functional Trainer. But let’s not sugarcoat it… machines are hella expensive! Luckily, you can simulate DOZENS of machine exercises (and do so affordably) with just a pair of Hydra Lever Arms. From machine-like bench presses and rows, to deadlifts and overhead press variations — all are possible with just a bit of creativity. And no, you won’t have to refinance your home to do it.
    Sometimes, floor space in your home gym is literally so tight that even a space-efficient Lat Pulldown Low Row Machine is totally out of the question. And while home gym enthusiasts across the world will mourn your loss, there’s still hope… You might not have enough room for a full machine, BUT power rack attachments like the Hydra Lever Arms are almost always possible. And when mounted, they add only 4.5″ to the front of your uprights — not too shabby! Looks like you won’t have to convert your living room into a second gym after all.

Specs Per Hydra Lever Arm

BrandBells of Steel
Total Length39.1"/993mm
Total Width28"/711mm
Total Depth8.5"/216mm
Steel Thickness11-Gauge
Sleeve Diameter1.9"/48mm
Loadable Sleeve Length12.75"/324mm
CoatingBlack Powder Coat
Total Capacity500lbs
WarrantyLimited Lifetime

IMPORTANT: The Hydra Lever Arms are ONLY compatible with our Hydra racks & true 3″ x 3″ uprights with 5/8″ holes. If installed on the exterior of your rack, it must be bolted down to avoid tipping and/or injury.

More AWESOME features on the Hydra Lever Arms

1.89 inch Diameter Sleeves highlight image

12.75" Loadable Sleeves

The Hydra Lever Arms feature 12.75″ of loadable length, offering PLENTY of space for your weight plates (three 45lb bumpers will fit comfortably with room to spare). But if you want to keep your plates from abandoning ship like pirates who are out of rum, grab a set of our axle collar clips — our Olympic spring collars are just a bit too big for the steel tubing sleeves.

Two handle options highlight image

Multi-Grip Handles

Grip variations are underrated. That’s why the Hydra Lever Arms are equipped with handles that offer regular, neutral & angled grip options. Whether you’re rowing or pressing, you’ll find a grip that feels just right! We even added a thick rubber stopper to the back, so your Hydra rack will still be in tip-top shape by the time it’s passed onto your great-grandchildren 👶🏻

Multi-Rack Compatible highlight image

Numbered 4-Way Holes

The tubing of the Hydra Lever Arms boasts the beloved 4-way hole design for greater versatility, and laser-engraved numbers for added convenience. When adjusting the handle height, the circular window indicates at which height the handle is mounted — taking out all the guesswork, so you can get back to clangin’ & bangin’.

Lever Arms Pair highlight 43 inches

Fits Inside 43" Depth Racks

While the Hydra Lever Arms lack the lockable angles of the Sliding Lever Arms, they CAN fit inside a power rack with a 43″ depth thanks to their 39.1″ total length. As to why you’d bring the party inside: they can be paired creatively with a set of spotter arms — by resting the rubber stopper against them, you can bench press safely 🦺

Frequently Asked Questions

The Hydra Sliding Lever Arms weigh 32lbs/14.5kg per arm.

The weight capacity of the Hydra Lever Arms is 500lbs per arm.

The steel thickness used on the Hydra Lever Arms is 11-gauge/2.9mm.

The loadable sleeve length on the Hydra Lever Arms is 12.75″/324mm.

Yes, the Hydra Lever Arms will work if mounted inside a power rack with a 43″ depth.

It’s possible. The brackets & welded pins of the Hydra Lever Arms are designed to be compatible with true 3″ x 3″ uprights with 5/8″ holes. If your rack’s upright do not have these dimensions, then this attachment will NOT fit.

The loadable sleeves of the Hydra Lever Arms fit 2″ Olympic weight plates.

The Hydra Lever Arms are shipped in 1 box.

To assemble the Hydra Lever Arms, you’ll need:
• 17mm box end wrench (not included)
• 17mm socket & ratchet (not included)

The Hydra Lever Arms are covered under our Limited Lifetime Warranty, which guarantees that they will not break under normal use and protects against defects in material, function and workmanship.