1. Home
  2. /
  3. All Products
  4. /
  5. Racks
  6. /
  7. Hydra
  8. /
  9. Hydra Attachments
  10. /
  11. Hydra Non-Storage Attachments
  12. /
  13. Lever Arms – Hydra – Pair

Lever Arms – Hydra – Pair

-

The Hydra Lever Arms simulate dozens of machine exercises in only a fraction of the space & without a jaw-dropping price tag.

Compatible with our Hydra Series racks & and any racks that have true 3″ x 3″ or 75 x 75mm uprights with 5/8″ or 1″ holes.

FEATURES • Manual height adjustments • 500lb capacity • 32lb weight • Multi handle options • Black powder coat • Ships unassembled

$59.99$279.98

     FREE SHIPPING

     TRUSTED SINCE 2010

     EXCELLENT WARRANTY

Add dozens of machine-like exercises to your gym without having to refinance your home.

Want a break from your barbell but aren’t ready to invest in an entire fleet of machines? You’ll love the Hydra Lever Arms.

Benefits of the Hydra Lever Arms

  • SIMULATE MACHINE EXERCISES
    Machines are great, but it’s rare for a single machine to accomplish more than a couple of exercises unless you’re a Functional Trainer. And let’s not sugarcoat it… machines are hella expensive! Luckily, you can simulate DOZENS of machine exercises while staying on budget with just a pair of Hydra Lever Arms. From machine-like bench presses and rows, to deadlifts and overhead press variations — all are possible with just a bit of creativity. And no, you won’t have to refinance your home to afford them 😉
  • SIMPLE HEIGHT ADJUSTING
    Unlike its tricked-out sibling (the Sliding Lever Arms), the Hydra Lever Arms must be removed from your uprights to change their height. That said, adjustments are straightforward with the simple mounting bracket & pin. Just slide the bracket’s welded pin through your upright at the desired height, and secure the rear detent pin to lock the entire arm into place. Re-position the handles if needed, and you’re ready to lift! And don’t forget, being the no-frills Lever Arm sibling has its perks — like costing less than HALF the price *cha-ching!*
  • MINIMAL FOOTPRINT
    Is floor space in your home gym so tight that even a space-efficient Cable Tower won’t fit? Lifters around the world will mourn your loss, but there’s still hope… because power rack attachments like the Hydra Lever Arms are almost always possible in Itty Bitty home gyms. When mounted, they add only 4.5″ to the front of your uprights, which isn’t too shabby. Plus, you can rock them inside your power rack if you have 43″ deep crossmembers. Looks like you won’t have to convert your living room into a second gym after all 🛋

Specs Per Hydra Lever Arm

Brand Bells of Steel
Weight 32lbs/14.5kg
Total Length 39.1"/993mm
Total Width 3.6"/91mm
Total Depth 8.5"/216mm
Steel Thickness 11-Gauge
Sleeve Diameter 1.89"/48mm
Sleeve Length Varies
Coating Black Powder Coat
Weight Capacity 500lbs/226.8kg
Warranty Limited Lifetime

IMPORTANT: The Hydra Lever Arms are only guaranteed to fit on true 3″ x 3″ uprights with 5/8″ holes. If installed on the exterior of your uprights, your rack MUST be bolted down to avoid tipping and/or injury.

More AWESOME features on the Hydra Lever Arms!

Two Handle Options

Grip variations are underrated, so you can choose your handle type with the Hydra Lever Arms. Both types offer regular, neutral & angled grips but the open style favors freedom, while the closed style favors grip options. Whether you’re rowing or pressing, you’ll find a grip that feels just right. Worried you’ll change your mind about the handles? No biggie. You can upgrade ’em whenever you’d like.

Multi-Rack Compatible

The Hydra Lever Arms fit perfectly on true 3″ x 3″ uprights with 5/8″ holes, but they don’t discriminate. They’re also compatible with imported 3″ x 3″ racks (which are actually 2.95″ x 2.95″) that have 5/8″ holes. And technically, they’ll also fit on uprights with 1-inch holes but they’ll be loose, so you should consider sourcing a set of spacers to fill the empty hole space 🌌

1.89" Diameter Sleeves

Depending on the handles you choose, you’ll get between 11.9″ and 12.75″ of loadable sleeve length, offering PLENTY of space for your weight plates — three 45lb crumb bumpers will fit comfortably with room to spare. But if you want to keep your plates from abandoning ship like pirates fresh out of rum, grab a set of axle collar clips. Classic spring collars are just a bit too big for those steel tubing sleeves.

Fits Inside 43" Depth Racks

Although the Hydra Lever Arms lack the lockable angles of the Sliding Lever Arms, they can fit inside a power rack with a 43″ depth thanks to their 39.1″ total length. Bringing the party inside means that you won’t have to worry about bolting your rack down. And maybe use them as a set of monolift arms while you’re at it 😉

Frequently Asked Questions

  • What is the weight of the Hydra Lever Arms?

    The weight of the Hydra Lever Arms is 32lbs/14.5kg per arm.

  • What are the dimensions of the Hydra Lever Arms?

    The dimensions of the Hydra Lever Arms are:

    • 39.1″/993mm length
    • 3.6″/91mm width
    • 8.5″/216mm depth
  • What is the weight capacity of the Hydra Lever Arms?

    The weight capacity of the Hydra Lever Arms is 500lbs per arm.

  • What is the steel thickness of the Hydra Lever Arms?

    The steel thickness of the Hydra Lever Arms is 11-gauge/2.9mm.

  • What is the coating on the Hydra Lever Arms?

    The coating on the Hydra Lever Arms is a black powder coat.

  • What is the loadable sleeve length on the Hydra Lever Arms?

    The loadable sleeve length on the Hydra Lever Arms is between 11.9″ and 12.75″, depending on the handle style you choose.

  • What weight plates fit the on the Hydra Lever Arms?

  • Will the Hydra Lever Arms work if mounted inside a power rack?

    The Hydra Lever Arms will only work if mounted inside a power rack with a 43″ depth. 

  • Will the Hydra Lever Arms fit a non-B.o.S. Hydra power rack?

    It’s possible. While the Hydra Lever Arms are ONLY guaranteed to fit on true 3″ x 3″ racks with 5/8″ holes, our customers have also mounted them on:

    • Imported 3″ x 3″ (75mm x 75mm) racks with 5/8″ or 1″ holes
    • True 3″ x 3″ (75mm x 75mm) racks with 1″ holes

    If mounting on anything other than a true 3″ x 3″ rack with 5/8″ holes, please understand that the Hydra Lever Arms will fit loosely. If you’d like to fill the empty hole space for a tighter fit, then source a set of spacers.

  • What tools are needed to assemble the Hydra Lever Arms?

    The tools needed to assemble the Hydra Lever Arms are:

    • 17mm box end wrench (not included)
    • 17mm socket & ratchet (not included)
  • What are the shipping box dimensions of the Hydra Lever Arms?

    The shipping box dimensions of the Hydra Lever Arms are: 

    Box 1:

    • 32lbs weight
    • 44″ length
    • 8″ width
    • 4.13″ height

    Box 2:

    • 19.5lbs weight
    • 16.5″ length
    • 10″ width
    • 4.5″ height

    Handles are shipped separately.

  • What is the warranty on the Hydra Lever Arms?

    The Hydra Lever Arms are covered under our Limited Lifetime Warranty, which guarantees that it will not break under normal use and protects against defects in material, function and workmanship.